Professional Service
Dryer Vent Repair Services in Los Angeles
Reconnect joints, replace plastic duct, fix exterior caps and dampers. Prevent mold, wood rot, and fire risk. From $99. Professional & Insured.
Quick Summary
Royal Cleaning Service repairs damaged, disconnected, or incorrectly routed dryer vents in Los Angeles starting from $99. We replace plastic accordion duct with rigid metal and fix disconnected joints inside walls. Available 7 days a week. Call (818) 301-4365.
Dryer Vent Repair in Los Angeles
A damaged or disconnected dryer vent is more than a performance problem, it is a structural and fire hazard. Royal Cleaning Service performs dryer vent repair in Los Angeles for disconnected joints, kinked or crushed duct sections, prohibited plastic duct replacement, failed exterior caps, and damaged flap dampers.
Repairs start at $99 and most are completed on the same visit as your inspection or cleaning.
The most dangerous dryer vent failure is a disconnected joint hidden inside a wall or crawlspace. When a duct joint separates, every dryer cycle pumps hot, moist, lint-laden air directly into your home\'s wall cavity or under-floor structure.
This moisture causes mold growth and wood rot that can go unnoticed for months or years, causing serious structural damage in addition to the fire and health risks from loose lint and hot exhaust. If your dryer is taking unusually long to dry clothes but your duct appears to be clear at the exterior cap, a hidden disconnection is a strong possibility.
We also repair or replace failed exterior caps, a broken or stuck flap damper can allow birds and rodents to nest inside the duct, creating a dangerous blockage. Repairs are sealed with foil tape (not standard duct tape, which fails at high heat) or mechanically fastened, per California building code.
Key Facts
- Dryer vent repair from $99
- Professional & insured technicians
- Same-day repair available
- All repairs sealed with foil tape (not duct tape)
- Prevents mold, wood rot, and fire hazards
- Open Sun–Fri 8AM–10PM, Sat 10AM–10PM
Dryer Vent Repairs We Perform
| Service | Price |
|---|---|
Minor Repair (cap, damper, seal) Exterior cap replacement, damper repair, or joint resealing | From $99 |
Duct Section ReplacementPopular Replacing a kinked, crushed, or plastic section with rigid metal | From $149 |
Disconnected Joint Repair (accessible) Reconnecting a separated joint in an accessible location | From $99 |
Hidden Disconnection Repair Locating and repairing joint separations inside walls or crawlspaces | Quoted on-site |
Why Standard Duct Tape Cannot Be Used on Dryer Vents
Despite the name, ordinary cloth-backed "duct tape" is not approved for dryer duct connections. At the temperatures produced by a dryer exhaust (which can reach 135°F or higher) the adhesive on standard duct tape softens and fails within months, allowing joints to pull apart and exhaust to leak into your wall.
California building code and the NFPA both require dryer duct joints to be secured with UL 181B-FX listed foil tape or with approved mechanical fasteners. All joints we repair are sealed with proper foil tape that holds at high heat and stays bonded for years.
A Disconnected Dryer Duct Inside a Wall Causes Mold and Wood Rot
If your dryer vent joint has separated inside a wall cavity, every load pushes hot humid air into your home structure. This causes mold growth, wood rot, and pest attraction that can cause thousands of dollars in damage before it is ever discovered. If your drying times are long but the exterior cap looks clear, call us for an inspection.
Signs include clothes taking very long to dry despite a clean lint trap, the laundry room feeling unusually humid after a cycle, visible condensation on walls, or unexplained mold near the laundry area. The exterior cap may still show some exhaust flow because hot air finds any available exit, even through small gaps.
No. Standard cloth-backed duct tape adhesive fails at dryer exhaust temperatures. California code requires foil tape rated for dryer duct use (UL 181B-FX listed) or approved mechanical fasteners for all dryer duct joints.
Simple repairs like cap replacement or joint resealing start at $99. Replacing a kinked or plastic duct section starts at $149. Hidden disconnections inside walls are quoted on-site after locating the problem. We provide a written estimate before any repair work begins.
We can often locate a disconnected section using airflow measurements and thermal assessment. For repairs requiring wall access, we discuss the least-invasive approach before opening any wall and provide a written estimate.
Yes. Replacing prohibited plastic or foil accordion duct with rigid metal is one of the most common repairs we perform. The replacement meets California code and dramatically improves both safety and drying efficiency.
Schedule Dryer Vent Repair in Los Angeles
From $99: Same-day available. Professional & Insured.