Professional Service
Dryer Vent Installation Services in Los Angeles
Code-compliant rigid metal dryer duct installation for new laundry rooms, relocated dryers, and unsafe duct replacement. From $699.
Quick Summary
Royal Cleaning Service installs new dryer vent systems in Los Angeles starting from $249, including rigid metal ductwork, exterior wall caps, and roof terminations. All installations are code-compliant with runs up to 25 feet. Available 7 days a week. Call (818) 301-4365.
Dryer Vent Installation in Los Angeles
When you\'re relocating a dryer, building a new laundry room, or replacing an unsafe plastic duct, you need dryer vent installation in Los Angeles done to California code. Royal Cleaning Service installs code-compliant rigid metal dryer duct runs from scratch, using the shortest possible path, minimum bends, and a proper exterior termination cap with a flap damper.
Installation starts at $699 depending on duct length and wall or ceiling routing required.
California building codes require dryer exhaust ducts to use rigid metal or semi-rigid aluminum: never plastic or foil accordion flex duct. Proper installation also requires an exterior termination point with a spring-loaded or louvered flap damper, which prevents birds and small animals from nesting in the duct when the dryer is not running.
A bird nest inside a dryer duct is both a fire hazard and a source of blockage that forces the dryer to overheat.
We design every installation with drying efficiency and fire safety as the primary goals, shortest run, fewest elbows, proper diameter for your specific dryer model, and correct exterior cap. Our technicians serve all of Los Angeles County, Orange County, and Ventura County. Call (818) 301-4365 for a quote.
Key Facts
- Dryer vent installation from $699
- Rigid metal duct: California code compliant
- Professional & insured technicians
- Exterior termination cap with flap damper included
- Quoted per job: no hidden fees
- Open Sun–Fri 8AM–10PM, Sat 10AM–10PM
What's Included in Dryer Vent Installation
| Service | Price |
|---|---|
Standard Dryer Vent InstallationPopular Rigid metal duct run up to ~10 ft with exterior termination | From $699 |
Extended or Complex Run Longer runs, attic routing, or multiple-story installations | Quoted on-site |
Plastic-to-Rigid Metal Replacement Removing existing non-compliant duct and installing proper metal duct | Quoted on-site |
Why Proper Dryer Vent Installation Matters
An improperly installed dryer vent is more dangerous than no vent at all. Common mistakes in DIY or low-quality installations include: using plastic duct that can melt and ignite; adding unnecessary 90-degree elbows that restrict airflow and create lint traps; running the duct too long (California code limits equivalent duct length to 25 feet, with reductions for each elbow); and terminating inside a wall cavity or attic instead of outdoors.
Each 90-degree elbow adds 5 feet of equivalent length to the duct run under California code. A run with three elbows and 12 feet of straight duct has an equivalent length of 27 feet, already over the code limit.
Our installations are designed from the start to comply with these limits, giving you a system that drains lint efficiently and passes any future inspection.
Exterior Cap Flap Dampers Prevent Bird Nesting
A bird or rodent nest inside a dryer duct is a serious fire hazard and a common blockage cause. Every installation we perform includes a spring-loaded or louvered exterior termination cap that stays closed when the dryer is off, preventing animal entry.
California building code requires rigid metal (galvanized steel or aluminum) or semi-rigid aluminum duct for dryer exhaust. Plastic duct and foil accordion flex duct are prohibited because they trap lint and can ignite or melt under high heat.
California code limits dryer duct runs to a maximum equivalent length of 25 feet. Each 90-degree elbow adds 5 feet of equivalent length, and each 45-degree elbow adds 2.5 feet. We design every installation to stay within these limits.
Dryer vents must terminate outdoors: never inside a wall cavity, crawlspace, attic, or garage. The exterior termination must have a flap damper (louvered or spring-loaded) to prevent backdraft and animal entry.
Roof terminations are not recommended and are often prohibited by local codes because they collect lint on the cap and allow water to drip down into the duct. Side-wall terminations are always preferred. We will find the best exterior exit point for your home's layout.
Installation starts at $699 for a standard run. Cost depends on duct length, routing complexity, and whether wall or ceiling penetrations are needed. We provide a written quote before any work begins.
Get a Dryer Vent Installation Quote in Los Angeles
From $699: Rigid metal, code-compliant, professional & insured.